Filter
Top Products
104
LSQT1561
Even if HDD or an SD
card is formatted, it
cannot be used.
≥ Either this unit or the SD card may be damaged. Please
contact consumer support (l 119).
≥ Use an SD card from 8 MB to 32 GB with this unit. (l 20)
The indication
disappears.
The screen is frozen.
No operation can be
performed.
≥ No operation can be performed on this unit when it is
connected to a PC.
≥ Turn off the power to this unit. If the power cannot be turned
off, remove the battery or AC adaptor and then reconnect it.
Turn on the power again. If normal operation is still not
restored, detach the power connected, and contact
consumer support. (l 119)
“ERROR OCCURRED.
PLEASE TURN UNIT OFF,
THEN TURN ON AGAIN.”
is displayed.
≥ The unit has automatically detected an error. Restart the
unit by turning off and on the power.
≥ The power will be turned off in about 1 minute if the power
is not turned off and on.
≥ Repair is needed if it is repeatedly displayed even if it is
restarted. Detach the power connected, and contact
consumer support. (l 119) Do not attempt to repair the unit
by yourself.
When the SD card is
inserted in this unit, it is
not recognized.
≥ Use this unit to format SD cards. Please be aware that if an
SD card is formatted, then all the data recorded on the card
will be erased. (l 71)
When the SD card is
inserted in another
device, it is not
recognized.
≥ Check that the device is compatible with the capacity or
type of SD card (SD Memory Card/SDHC Memory Card)
that you inserted. Refer to the operating instructions of the
device for details.
Problem Check points
SDR-H79P-LSQT1561_mst.book 104 ページ ２００９年２月１２日 木曜日 午後４時２１分