86 LSQT1438 87LSQT1438
Others
1
Menus (cont.)
Recording and playback functions can be used and basic settings made.
(For setting procedures, see P.20.)
Settings enclosed in
are active at the time of purchase.●
SETUP menu
Item Purpose Settings/Notices Mode Page
RESUME PLAY Continue playback from the point it was stopped.
OFF
/ ON
54
DISPLAY
Display current information or settings on the LCD monitor.
Even when this item is set to [OFF], the operating status, date
and world time will remain displayed.
• OFF /
ON
26
DATE/TIME Select the date and time display mode.
OFF
/ D/T / DATE
22
DATE FORMAT Select the date display format. Y/M/D / M/D/Y /
D/M/Y
22
FORMAT CARD Format SD cards. YES / NO
58
QUICK START Start recording instantly. OFF /
ON
19
ECONOMY
Turn off the unit if the unit is not being operated.
This function does not work in the following cases.
While using the AC adaptor
While connected to a computer or printer via USB
•
•
OFF /
5 MINUTES
: The unit turns off if the unit is not operated
for about 5 minutes. To resume the unit use,
set the mode dial to [OFF] and then the
desired mode position.
―
BEEP SOUND
Allow operations such as starting and ending recording to be
signaled by a beep.
When [ON]
Beep: • When recording starts or the unit is turned on
• When a computer or printer is recognized
Beep-Beep: • When recording stops or the unit is turned off
Beep-Beep, Beep-Beep … (4 times consecutively):
• If an error that prevents recording occurs, etc. Check
the message (P.90) that appears on the LCD monitor.
OFF /
ON
―
POWER LCD Adjust the brightness of the LCD monitor.
AUTO
/ / / /
[ ] is automatically selected when the AC adaptor is
used.
[AUTO] is not displayed with the mode dial set to [
] or
[
], or in manual mode, where [ ] is the default.
•
•
23
LCD SET Adjust brightness or colour density of the LCD monitor. YES / NO
23
TV ASPECT Display images at the aspect ratio of a connected TV. 4:3 /
16:9
60
EXT. DISPLAY Display information on a connected TV.
OFF /
ON
When the unit has been turned on with the mode dial set to
[
] or [ ], [ON] is set automatically.
60
INITIAL SET
Return all settings except for [LANGUAGE] and [CLOCK SET] to
their defaults at the time of purchase.
YES / NO
―
DEMO MODE
Display an introduction to the unit (demonstration mode).
The demonstration stops when any operation except pressing the
[iA] or [MANUAL AF/MF] button is performed, but it will resume if no
operations are performed for approx. 10 or more minutes.
OFF : [OFF] is normally set.
ON
: When the AC adaptor is connected without an SD
card having been inserted, the demonstration starts,
and it stops when an SD card is inserted.
―