Filter
Top Products
Creating a DVD-Video disc on a computer
135
LSQT1025
With a computer
3 (On the computer)
Select [start] # [All Programs (Programs)] #
[Panasonic] # [DVD-MovieAlbumSE] #
[DVD-MovieAlbumSE].
DVD-MovieAlbumSE starts and the images recorded on the disc are displayed.
4 (When using a DVD-RAM only)
Edit the images on the disc as required.
5 Click ([Additional]) and select [File Export] #
[Export all titles] or [Export a title].
6 Set the export settings in the [Export all titles] ([Export a
title]) screen and click [Start].
≥ It is recommended that you do not change the settings displayed on the screen.
7 When export is complete, a message will appear.
Check the small box for [Eject the disc being used.],
and then click [Yes].
DVD-MovieAlbumSE automatically closes and DVDfunSTUDIO
automatically starts.
When starting DVD-MovieAlbumSE, the [Mount Information] dialogue box may appear or the
recorded images may not be shown. If this occurs, try the following procedure. If there are
multiple drives, a drive other than this unit may be selected.
1) Click [Preference] on the dialogue box or ([Preference]) button at top right of
DVD-MovieAlbumSE screen, and then click the [Device setting] tab.
2) Choose the drive where the disc is loaded in the [Drive Select] column, and then click [OK].
LSQT1025(ENG).book 135 ページ ２００６年２月４日 土曜日 午後６時１０分