Filter
Top Products
Others
107
VQT1J82
mode, the resolution of the recorded
picture decreases slightly because of
high sensitivity processing.
This is not a malfunction.
8: The brightness or the hue of the
recorded picture is different from the
actual scene.
•If recording under fluorescent light, the
brightness or the hue may change
slightly when the shutter speed
becomes fast. This occurs due to the
characteristics of fluorescent light. It is
not a malfunction.
9: A reddish vertical line appears on
the LCD monitor when the shutter
button is pressed halfway or when
recording motion pictures.
•This is a
phenomenon called
smear. It is a
characteristic of
CCD and appears
when the subject
has a bright part. Black or green vertical
lines may also appear or uneven colors
may appear around the smear. This is
not a malfunction. It is recorded in
motion pictures but is not recorded on
still pictures.
10:Motion picture recording stops in the
middle.
•Are you using a MultiMediaCard?
–This unit does not support
MultiMediaCards.
•When you set the picture quality to
[30fpsVGA] or [30fps16:9], we
recommend using a high-speed card
with “10MB/s” or greater displayed on
the package.
•Depending on the type of the card,
recording may stop in the middle.
∫ LCD monitor
1: The LCD monitor sometimes turns
off although the camera is turned on.
•Have you set economy mode? (P18)
–In economy mode, the LCD monitor
turns off while the flash is charged.
2: The LCD monitor becomes darker or
brighter for a moment.
•This phenomenon appears when you
press the shutter button halfway to set
the aperture value and does not affect
the recorded pictures.
3: The LCD monitor flickers indoors.
•The LCD monitor may flicker for a few
seconds after turning the camera on
indoors under fluorescent light.
This is not a malfunction.
4: The LCD monitor is too bright or
dark.
•Adjust the brightness of the screen.
(P18)
•Is the power LCD function or high angle
mode activated?
5: Black, red, blue and green dots
appear on the LCD monitor.
•These pixels do not affect the recorded
pictures.
This is not a malfunction. (P101)
6: Noise appears on the LCD monitor.
•In dark places, noise may appear to
maintain the brightness of the LCD
monitor.
This does not affect the pictures you are
recording.
∫ Flash
1: The flash is not activated.
•Is the flash setting set to Forced OFF
[]?
–Change the flash setting. (P34)
•The flash is not activated when motion
picture mode [ ] (P50), [SCENERY],
[NIGHT SCENERY], [SUNSET],
[HI-SPEED BURST], [STARRY SKY],
[FIREWORKS] or [AERIAL PHOTO] in
scene mode is selected. (P41)
2: The flash is activated 2 times.
•When you select red-eye reduction
(P34), the flash is activated once before
the actual recording to reduce the
red-eye phenomenon (eyes of the
subject appearing red in the picture)
DMC-FX33_ENG.book 107 ページ ２００７年７月９日 月曜日 午後１２時５８分