Filter
Top Products
Advanced (Recording pictures)
64
VQT1J82
•The number of pictures indicated is when
the shutter speed is faster than 1/60 and
the flash is not activated.
•The burst speed (pictures/second) may
become slower depending on the
recording environment such as in dark
places, if the ISO sensitivity is high etc.
•If you take pictures in burst mode with the
built-in memory, it will take time to write
the picture data.
•Hold down the shutter button fully to
activate the burst mode.
•You can have higher speed burst if you
use [HI-SPEED BURST] in scene mode.
Refer to P47 for information about
[HI-SPEED BURST].
•When the burst mode setting is set to
Unlimited
–The burst speed becomes slower
halfway. The exact timing of this
depends on the type of card, the picture
size and the quality.
–You can take pictures until the capacity
of the built-in memory or the card is full.
•The focus is fixed when the first picture is
taken.
•The exposure and the white balance vary
depending on the burst mode setting.
When burst mode is set to [ ], they are
fixed to the values set for the first picture.
When the burst speed is set to [ ], they
are adjusted each time you take a picture.
•If you are following a moving subject while
taking pictures in a place (landscape)
indoors, outdoors etc. where there is a
large difference between the light and
shade, it may take time until the exposure
is stable. If burst is used at this time, the
exposure may not become optimal.
•When the self-timer is used, the number
of recordable pictures in burst mode is
fixed to 3.
•Burst mode is not canceled when the
camera is switched off.
•When auto bracket and burst mode are
set simultaneously, auto bracket will be
performed.
•When burst mode is set, the auto review
function is activated regardless of the auto
review setting. (The picture is not
enlarged.) You cannot set the auto review
function in the [SETUP] menu.
•When burst mode is activated,
[AUDIO REC.] cannot be used.
•When the flash is activated, you can take
only 1 picture.
•Burst mode cannot be set in
[HI-SPEED BURST] and [STARRY SKY]
in scene mode.
Press [ ] to display the [REC] mode
menu and select the item to set. (P55)
Illuminating the subject makes it easier for
the camera to focus when recording in low
light conditions that make focusing difficult.
•If the AF assist lamp is
set to [ON], an AF area
with a size wider than
usual is displayed and the
AF assist lamp A turns
on when you press the shutter button
halfway in dark places etc.
•Be careful about the following when using
the AF assist lamp.
–Do not look at the AF assist lamp at
close range.
–Do not cover the AF assist lamp with
your fingers or other objects.
•When you do not want to use the AF
assist lamp (e.g. when taking pictures of
animals in dark places), set the
[AF ASSIST LAMP]
Focusing in low light conditions
becomes easier
[ON]
The AF assist lamp turns on in low
light conditions. At this time, the
AF assist lamp icon [ ] appears
on the screen. The effective range
of the AF assist lamp is 1.5 m
(4.92 feet).
[OFF]
The AF assist lamp does not turn
on.
/SET
MENU
DMC-FX33_ENG.book 64 ページ ２００７年７月９日 月曜日 午後１２時５８分