When using for the first time, be sure to adjust the
3D
Conversion Lens attachment position.
• Change the mode
to
.;;
on
the
video
camera.
1 Attach the
3D
Conversion
Lens
to
the
video camera. (
..
10)
2 Turn on the
video
camera.
• Turn
on
with the video camera in a horizontal state.
• The 3D Conversion Lens adjustment mode screen
will appear automatically after performing the initial
setting.
•
If
the
3D
Conversion Lens
adjustment
mode
screen does
not
appear
automatically,
set
from
the menu on the
video
camera.
([SETUP]
~
[3D CONV. LENS SETUP])
3 Attach the lens
front
cap
to
the
3D
Conversion
Lens. (
..
14)
'·,·."·."
..
,,.AQ~9~T
...
,·,·,
o Guide Line
• 2 screens will appear.
• The horizontal line for adjustment
on
the lens front
cap is displayed on the screen.
4 Touch [ADJUST].
• If the black vertical line and the black horizontal line
are within the red guidelines
0 and adjustment is not
required, touch [EXIT] and proceed to Step
11.
• Perform the adjustment in a bright location where the
horizontal line for adjustment will
be
clearly visible.
15
(ENG)VQT3A68