Do
not
allow
any
insecticide
or
volatile
substance
to
get
on
the
3D
Conversion Lens
if
they
are
used
in
the
surrounding
area.
• Failure
to
observe this may result
in
deformation
or
the coating peeling off.
Do
not
use solvents
such
as benzine, thinner,
alcohol,
etc.,
for
cleaning.
• Solvents may cause discoloration or damage.
• Do not touch or contaminate the surface
of
the
protective glass. Blow any dust off using a
commercially available blower brush and wipe gently
with a dry soft cloth if contaminated.
• Do not use any kitchen detergent or chemical treated
wipes.
When
requesting a repair
of
the
3D
Conversion
Lens, request a repair
of
the
video
camera as well,
as
the
cause
of
the
problem
may
be in the
video
camera.
•
About
3D
recording
Attach the 3D
Conversion
Lens
securely. It
must
not
be used
with
an
insecure
attachment.
Be sure
to
perform
the
convergence
adjustments
before use.
Recording
with
a
misaligned
lens
may
lead
to
eye
fatigue
or
discomfort.
The lens
should
be aligned each
time
it
is
re-attached
to
the
camcorder
body.
With the
3D
Conversion
Lens
attached,
do
not
record a
subject
at
less
than
the
minimum
focus
distance.
Only
record
subjects
that
are beyond
1.2 m (3.9 feet).
• The
3D
effects may be more pronounced, and
therefore cause tiredness or discomfort.
• The minimum focus distance is approx. 1.2 m
(3.9 feet).
When
recording
with
the
3D
Conversion
Lens
attached, be
careful
not
to
shake
the
video
camera.
• Tiredness or discomfort may result
if
the shake
is
pronounced, due to riding
in
a vehicle or walking etc.
• When moving the video camera as you record, move
it
slowly.
•
We
recommend using a tripod.
5
(ENG)VQT3A68