Filter
Top Products
•
It
is
recommended to stabilize the video camera using
the lens front cap as a platform when performing the
adjustment.
(~
14)
• Touch [COMPLETE].
10
Touch [EXIT]
to
end the
adjustment.
• After adjustment, a single screen appears.
•
When
re-attaching
the
3D
Conversion
Lens
or
after
an
impact
etc.,
it
is
recommended
that
you
perform
the
adjustment
again.
11
Press
the
recording
start/stop
button
to
start
recording.
• When the 3D Conversion Lens is attached, the zoom
position
is
fixed, and the zoom operation
is
disabled.
• When recording
in
3D, the image will appear with
gray frame around
it.
The gray frame will be recorded
in
the video.
• Use of a tripod
is
recommended for recording with a
stable picture.
• The reception range for the remote control might
become narrow at the upper side
of
the video
camera, so operate from the lower side.
• The LCD monitor of the video camera will not display
in
3D.
•
You
will hear a sound when the video camera
is
moved rapidly with the 3D Conversion Lens attached,
but this is not a malfunction.
• When the adjustment dial is rotated too much, you will
hear a "clapping" sound and the adjustment screen
will stop moving.
In
such a case, rotate the
adjustment dial
in
the opposite direction until the
adjustment screen starts moving.
• The functions that can be used are limited depending
on
the video camera that is being used. For details,
refer to the operating instructions
of
the video
camera.
To
ensure
that
the
3D
video
can be
safely
viewed,
pay
attention
to
the
following
points
when
recording.
• Where possible, record with the video camera
in
a horizontal state.
• Do not get too close to the subject. (record from a distance
of
at least 1.2 m (3.9 feet).)
• When moving the video camera as you record, move it slowly.
• Try to hold the video camera as steady
as
possible when recording while riding
in
a vehicle or walking.
18
VQT3A68(ENG)