Filter
Top Products
15
Specifications
Power source and
power consumption: WV-CP280: 120 V AC 60 Hz, 3.4 W
WV-CP284: 24 V AC 60 Hz, 2.7 W, 12 V DC, 220 mA
Image sensor: 1/3 inch interline transfer CCD
Effective pixels: 768 (H) x 494 (V)
Scanning area: 4.9 mm (H) x 3.7 mm (V)
Scanning system: 2 : 1 interlace
Scanning frequency: Horizontal: 15.734 kHz
Vertical: 59.94 Hz
Scanning: 525 lines/60 fields/30 frames
Synchronization: Internal (INT), multiplexed vertical drive (VD2) or line-lock (LL)
Resolution: Horizontal: 540 TV lines (at center)
Vertical: 350 TV lines (at center)
Minimum illumination: 0.8 lx {0.08 foot-candle} at F1.4, 0.6 lx {0.06 foot-candle} at F1.2
Signal-to-noise ratio: 50 dB (equivalent to AGC Off, weight On)
Video output: 1.0 V[P-P] NTSC composite 75 Ω (BNC)
Lens mount: CS-mount
White balance: ATW
Light control mode setting: ALC/ELC
Switch function: Light control mode selector (ALC/ELC), Backlight compensation
selector (ON/OFF), Adaptive Black Stretch selector (ON/OFF),
Simple day/night mode selector (ON/OFF), Synchronization mode
selector (INT/LL)
Ambient temperature: –10°C - +50°C {14°F - 122°F}
Ambient humidity: Less than 90 %
Dimensions: 67 (W) x 65 (H) x 139.5 (D) mm
{2-5/8"(W) x 2-9/16"(H) x 5-1/2"(D)}
(excluding the lens connector)
Weight: WV-CP280: 510 g {1.12 lbs.}
WV-CP284: 350 g {0.77 lbs.}
Weights and dimensions indicated are approximate.
Standard Accessories
Operating Instructions (this book) .............. 1 pc.
Warranty card ............................................. 1 pc.