Filter
Top Products
53
[SETUP-SW LOCK]
Select "ON" or "OFF" to determine whether or not to use
the operation buttons on the camera for the flange-back
length adjustment.
ON: The operation buttons on the camera are unavail-
able for the flange-back length adjustment.
OFF: The flange-back length can be adjusted using the
operation buttons on the camera.
Default: OFF
Important:
• Adjust the flange-back length depending on a subject as follows.
• We assume no responsibility whatsoever for any damages resulting from the use of the auto back focus function.
Subject/shooting location/environment
Standard subject
Moves frequently
Illuminance changes largely
Low illuminance
Extremely bright or reflects light
Through a window
Location where the lens can get dirt easily
Brightness difference is almost none (white
wall, etc.)
Having large depth
Frickers continuously
Parallel horizontal lines such as a roll-up
door
Recommended adjustment method
Flange-back length adjustment
[ABF]
[C/L ←→ B/W] setting
"AUTO"
Adjust finely with "MANUAL-
ADJ" after using "ABF".
[MANUAL-ADJ]
PRESET or FIX