Panasonic WV-SF539E Security Camera User Manual


 
2 Monitor images on a cellular phone/mobile
terminal
2.1 Monitor images on a cellular phone
It is possible to connect to the camera using a cellular phone via the Internet and monitor images (JPEG only)
from the camera on the screen of the cellular phone.
IMPORTANT
When the authentication window is displayed, enter the user name and password. The default user
name and password are as follows.
User name: admin
Password: 12345
To enhance the security, change the password for the user “admin”. (®page 138)
If the cellular phone in use is not compatible with UTF-8 encode, it is impossible to display the screen
correctly.
When “3 mega pixel [4:3]” is selected for “Image capture mode”, images cannot be monitored on a
cellular phone. Select “2 mega pixel [16:9]”, “1.3 mega pixel [16:9]”, or “1.3 mega pixel [4:3]” for “Image
capture mode” to monitor images.
Note
It is necessary to configure the network settings of the cellular phone in advance to connect to the
Internet and monitor images from the camera. (®page 148)
Operating Instructions 19
2 Monitor images on a cellular phone/mobile terminal