Panasonic WV-SF548 Security Camera User Manual


 
Example of entry:
Example when entering an IPv4 address: http://192.168.0.10:8080
Example when entering an IPv6 address: http://[2001:db8:0:0:0:0:0:1]:8080
To access the cameras using the HTTPS protocol, enter as follows:
Example of entry: https://192.168.0.10/
Available number of characters: 1 - 128 characters
Default: (Cam. 1) selfcamera, (Cam. 2 - 16) not registered
IMPORTANT
When accessing the camera using the HTTPS protocol, install the security certificate of the camera to
display images on the monitor. (®page 163)
“Network Camera Recorder with Viewer Software Lite” which supports live monitoring and recording
images from multiple cameras is available. For further information, refer to our website
(http://panasonic.net/pss/security/support/info.html).
This camera is specified when “selfcamera” is displayed for the IP address or host name.
Note
When using the host name, it is necessary to configure the DNS settings of the PC to be used for the
multi-screen display. Refer to the network administrator for information on the DNS setting of PCs.
[Camera title]
Enter the title of the camera. The entered camera title will be displayed on a multi-screen.
Available number of characters: 0 - 20 characters
Unavailable characters: " &
Default:
(Cam. 1) Varies as follows depending on the model in use.
WV-SW559
SW559
SW559
/WV-SW558
SW558
SW558
/WV-SP509
SP509
SP509
/WV-SP508
SP508
SP508
/WV-SF549
SF549
SF549
/WV-SF548
SF548
SF548
/WV-SF539
SF539
SF539
/WV-SF538
SF538
SF538
(Cam. 2 - 16) None (blank)
Note
When selecting a 16 split-screen, some characters of the camera title to be displayed may not be
displayed.
Even when “16:9” is selected for the aspect ratio, the multi-screen is displayed in 4:3.
Operating Instructions 113
12 Configure the multi-screen settings [Multi-screen]