Panasonic WV-SF548 Security Camera User Manual


 
[Advanced view] button
Displays the “Advanced view” page. The settings relating to cropping and picture in picture (PiP) can be
configured on the “Advanced view”. (®page 132)
[User mng.] button
Displays the “User mng.” page. The settings relating to the authentication such as users and PCs
restrictions for accessing the camera can be configured on the “User mng.” page. (®page 138)
[Server] button
Displays the “Server” page. The settings relating to the E-mail server, the FTP server and the NTP server
to which the camera accesses can be configured on the “Server” page. (®page 143)
[Network] button
Displays the “Network” page. The network settings and the settings relating to DDNS (Dynamic DNS),
SNMP (Simple Network Management Protocol) and the FTP (File Transfer Protocol) periodic transmission
can be configured on the “Network” page. (®page 148)
[Schedule] button
Displays the “Schedule” page. On the “Schedule” page, it is possible to designate time zones to allow to
receive alarm input or to allow to activate the VMD detection function. (®page 184)
[Maintenance] button
Displays the “Maintenance” page. System log check, firmware upgrade, status check and initialization of
the setup menu can be carried out on the “Maintenance” page. (®page 187)
Camera title
The title of the camera whose settings are currently being configured will be displayed.
Setup page
Pages of each setup menu will be displayed. There are tabs for some setup menus.
Operating Instructions 51
9 Display the setup menu from a PC