Panasonic WV-SF549 Security Camera User Manual


 
The settings relating to SNMP can be configured on this page. It is possible to check the status of the camera
by connecting to the SNMP manager. When using the SNMP function, contact the network administrator.
[Community]
Enter the community name to be monitored.
Available number of characters: 0 - 32 characters
Default: None (blank)
IMPORTANT
When using the SNMP function, it is necessary to enter the community name. When no community
name is entered, the SNMP function will not work.
[System name]
Enter a system name to be used to manage the camera with the SNMP function.
Available number of characters: 0 - 32 characters
Default: None (blank)
[Location]
Enter the name of the location where the camera is installed.
Available number of characters: 0 - 32 characters
Default: None (blank)
[Contact]
Enter the E-mail address or the phone number of the SNMP manager.
Available number of characters: 0 - 255 characters
Default: None (blank)
18.6 Configure the settings relating to the FTP
periodic image transmission [FTP img. trans.]
Click the [FTP img. trans.] tab on the “Network” page. (®page 46, page 48)
The settings relating to the periodic transmission of images to an FTP server can be configured on this page.
To transmit images to an FTP server periodically, it is necessary to configure the settings of the FTP server in
advance (®page 144). Refer to page 181 for descriptions of how to configure schedules of image
transmission.
IMPORTANT
Depending on the network line speed or the network traffic, images may not be transmitted at the exact
designated interval or period.
Operating Instructions 179
18 Configuring the network settings [Network]