Panasonic WV-SF549 Security Camera User Manual


 
[OSD] - [Position]
Select the position where the time and date and a character string to be displayed on the image of the “Live”
page.
Upper left: The above information will be displayed at the upper left corner of the main area on the
“Live” page.
Lower left: The above information will be displayed at the lower left corner of the main area on the
“Live” page.
Upper right: The above information will be displayed at the upper right corner of the main area on the
“Live” page.
Lower right: The above information will be displayed at the lower right corner of the main area on the
“Live” page.
Default: Upper left
[Brightness status display]
Select “On” or “Off” to determine whether or not to display the status of brightness on images displayed on the
“Live” page when adjusting brightness.
Default: On
[Upside-down]
Select “On” or “Off” to determine whether or not to turn the image upside-down.
Default: Off
[Indicator]
Determine whether or not to use the following indicators. Select “On” to use the following indicators to check
the operational status by lighting them. Select “Off” to turn off the indicators at all times.
Link indicator
Access indicator
SD memory card error indicator/AF indicator
SW559
SW559
SF549
SF549
SF539
SF539
SD memory card error indicator/ABF indicator
SP509
SP509
AF indicator
SW558
SW558
SF548
SF548
SF538
SF538
ABF indicator
SP508
SP508
Default: On
Note
Link indicator (orange): This indicator will light when communication with the connected device is
available.
Access indicator (green): This indicator will light when accessing a network.
SD memory card error indicator/AF indicator (red)
SW559
SW559
SF549
SF549
SF539
SF539
: Lights when an error
occurred in the SD memory card. This LED will blink in the process of the auto focus function and
blinking will stop when the focus adjustment is complete.
SD memory card error indicator/ABF indicator (red)
SP509
SP509
: Lights when an error occurred in the SD
memory card. This LED will blink in the process of the auto back focus function and blinking will stop
when the focus adjustment is complete.
[Alarm status update mode]
Select an interval of the camera status notification from the following.
When the status of the camera changes, the alarm occurrence indication button, the [AUX] button or the SD
saving status indicator (
SW559
SW559
SP509
SP509
SF549
SF549
SF539
SF539
) will be displayed to notify of the camera status.
Polling(30s): Updates the status each 30 seconds and provide notification of the camera status.
Real time: Provide notification of the camera status when the status has changed.
Default: Real time
54 Operating Instructions
10 Configure the basic settings of the camera [Basic]