Panasonic WV-SP306 Security Camera User Manual


 
Generation of the CRT key (SSL encryption key) (®page 172)
Generation of the self-signed certificate (®page 173)
Generation of CSR (Certificate Signing Request) (®page 175)
Installation of the server certificate (®page 177)
Configuration of the connection protocol (®page 178)
Note
To use the server certificate, you need to apply for the approval and the issue of server certificate by
CA.
Either of the self-signed certificate or the server certificate is available. If both of them are installed, the
server certificate will be used prior to the self-signed certificate.
17.2.1 Generation of the CRT key (SSL encryption key)
IMPORTANT
When the self-signed certificate or server certificate is valid, it is impossible to generate the CRT key.
When the server certification is used, the available key size varies depending on the Caches the
available key size in advance.
To generate the CRT key, it may take about 1 minute when the key size is 1024 bit and about 2 minutes
when the key size is 2048 bit. Do not operate the web browser until the generation of CRT key is
complete. While the CRT key is being generated, the refresh interval and line speed may be lower.
1. Click the [Execute] button of “CRT key generate”.
The “CRT key generate” dialog box will be displayed.
2. Select “1024bit” or “2048bit” for the length of the CRT to generate for “CRT key generate” - “RSA key
size”.
Note
To use the server certificate, follow the requests from the CA about the RSA key size.
3. Click the [Execute] button.
The generation of CRT key will be started. When the generation is finished, the key size and generation
time & date of the generated key will be displayed on “Current CRT key”.
Note
To change (or update) the generated CRT key, perform step 1 to 3. The CRT key, self-signed certificate
and server certification are valid in a set. When the CRT key is changed, it is necessary to re-generate
the self-signed certificate or re-apply for the server certificate.
172 Operating Instructions
17 Configuring the network settings [Network]