Panasonic WV-SP306 Security Camera User Manual


 
Aspect ratio 4:3 H.264(1) QVGA/VGA/800x600
*1
/1280x960
*2
H.264(2) QVGA/VGA
Aspect ratio 16:9 H.264(1) 320x180/640x360/1280x720
*2
H.264(2) 320x180/640x360
Picture (Camera) mode
NP502
NP502
1.3 mega pixel (VGA) [4:3] H.264(1) QVGA/VGA/1280x960
H.264(2) QVGA/VGA
1.3 mega pixel (800x600) [4:3] H.264(1) QVGA/800x600/1280x960
H.264(2) QVGA/800x600
1.3 mega pixel [16:9] H.264(1) 320x180/640x360/1280x720
H.264(2) 320x180/640x360
3 mega pixel [4:3] H.264(1) QVGA/VGA/1280x960
H.264(2) QVGA/VGA
3 mega pixel [16:9] H.264(1) 320x180/640x360/1920x1080
H.264(2) 320x180/640x360
Default:
H.264(1): 1280x960
SW355
SW355
SF346
SF346
SF335
SF335
SW316L
SW316L
SW316
SW316
SW314
SW314
SP306
SP306
SP305
SP305
SW155
SW155
SF135
SF135
SP105
SP105
SW115
SW115
NP502
NP502
/VGA
SW352
SW352
SF342
SF342
SP302
SP302
SW152
SW152
SF132
SF132
SP102
SP102
H.264(2): VGA
[Transmission priority]
Select a transmission priority for H.264 images from the following.
Constant bit rate: H.264 images will be transmitted with the bit rate selected for “Max bit rate (per
client) *”.
Frame rate: H.264 images will be transmitted with the frame rate selected for “Frame rate*”.
Best effort: In accordance with the network bandwidth, H.264 images will be transmitted with the bit rate
varying between the maximum and minimum bit rates that are set for “Max bit rate (per client)*”.
Default: Frame rate
Note
When “Frame rate” is selected for “Transmission priority”, number of users who can access the camera
may be limited more (may become less than 10).
[Frame rate*]
Select a frame rate for H.264 images from the following.
1fps/ 3fps/ 5fps*/ 7.5fps*/ 10fps*/ 12fps*/ 15fps*/ 20fps*/ 30fps*
Default: 30fps*
Note
When “Frame rate” is selected for “Transmission priority”, this setting is available.
“Frame rate*” is restricted by “Max bit rate (per client)*”. For this reason, the frame rate may be lower
than the specified value when any value marked with an asterisk (*) is selected.
82 Operating Instructions
11 Configure the settings relating to images and audio [Image/Audio]