Panasonic WV-SP508 Security Camera User Manual


 
Note
When the [Authentication] setting has been changed, close the web browser, and then access the
camera again.
For other devices such as network disk recorders, unless otherwise stated, Digest authentication is
not supported. (As of December, 2011)
[User name]
Enter a user name.
Available number of characters: 1 - 32 characters
Unavailable characters: " & : ; \
Default: None (blank)
[Password] [Retype password]
Enter a password.
Available number of characters: 4 - 32 characters
Unavailable characters: " &
Default: None (blank)
Note
When the user name already in use is entered and the [Set] button is clicked, the respective user
information will be overwritten.
[Access level]
Select the access level of the user from the following.
1. Administrator: Allowed all available operations of the camera.
2. Camera control: Allowed to display images from the camera and to control the camera. The camera
setting configuration is unavailable.
3. Live only: Only displaying live images is available. The camera setting configuration and camera control
are unavailable.
Default: 3. Live only
[User check]
From the pull-down menu of “User check”, the registered user can be selected and the selected user’s
information can be checked.
The registered user will be displayed with the access level.
(Example: admin [1])
To delete the registered user, click the [Delete] button after selecting the user to be deleted.
16.2 Configure the settings relating to the host
authentication [Host auth.]
Click the [Host auth.] tab on the “User mng.” page. (®page 46, page 48)
Operating Instructions 139
16 Configure the settings relating to the authentication [User mng.]