Panasonic WV-SP508 Security Camera User Manual


 
Default: Auto1(Normal)
Note
The operating sound might be heard when changing to black-and-white mode, however it does not
indicate any malfunction.
[Day & Night(electrical)]
SW558
SW558
SP508
SP508
SF548
SF548
SF538
SF538
Select switching between the color mode and the black & white mode from the following.
Off: The color mode is selected.
Auto: Switches from color to black-and-white images when the ambient brightness (illuminance) of the
camera is approx. 1.0 lx or less. It takes time to switch between modes.
Default: Off
[Level]
SW559
SW559
SP509
SP509
SF549
SF549
SF539
SF539
Select the threshold illuminance level (brightness) to switch between the color mode and the black & white
mode.
The descriptions about the following threshold illuminance levels are given when “Off” is selected for “Super
Dynamic(SD)”.
High: Switches from the color mode to the black & white mode when the ambient brightness (illuminance)
of the camera is approx. 6 lx or less.
Low: Switches from the color mode to the black & white mode when the ambient brightness (illuminance)
of the camera is approx. 2 lx or less.
Default: High
[Dwell time]
SW559
SW559
SP509
SP509
SF549
SF549
SF539
SF539
Select a wait time for switching between the color mode and the black & white mode from the following.
2s/ 10s/ 30s/ 1min
Default: 10s
[White balance]
Select a method of white balance adjustment from the following.
White color can be adjusted by “Red gain” and “Blue gain”.
ATW1: Selects the automatic tracing white balance mode. The camera will constantly check the color
temperature of the light source and adjust the white balance automatically. Operating color temperature
range is approx. 2,700 K to 6,000 K.
ATW2: Selects the automatic tracing white balance mode under a sodium lamp. The camera will adjust
the white balance automatically under a sodium lamp. Operating color temperature range is approx. 2,000
K to 6,000 K.
AWC: Selects the automatic white balance control mode. This adjustment is suitable for a location where
a light source is stable. Operating color temperature range is approx. 2,000 K to 10,000 K.
Default: ATW1
Note
Under the following conditions, color may not be faithfully processed. In these cases, select “AWC”.
When shooting a subject whose major part is a thick color
When shooting blue sky or sun at sunset
When shooting a subject whose luminance is too low
When “AWC” is selected, click the [Set] button.
[Red gain]
Adjust the red color of images.
When the cursor is moved in the “+” direction, the red color will become thicker. When the cursor is moved in
the “-” direction, the red color will be thinner. Click the [Reset] button to reset the color to the default.
Operating Instructions 95
11 Configure the settings relating to images and audio [Image/Audio]