Panasonic WV-SP508 Security Camera User Manual


 
IMPORTANT
When entering the host name for “SMTP server address” or “POP server address”, it is necessary to
configure the DNS settings on the [Network] tab of the “Network” page. (®page 148)
[Authentication]
Type
Select the authentication method to send E-mails from the following.
None: It is not necessary to clear any authentication to send E-mails.
POP before SMTP: It is necessary to first clear the POP server authentication to use the SMTP server
to send E-mails.
SMTP: It is necessary to clear the SMTP server authentication to send E-mails.
Default: None
Note
When you don’t know the authentication method to send E-mails, refer to the network administrator.
User name
Enter the user name to access the server.
Available number of characters: 0 - 32 characters
Unavailable characters: " & : ; \
Password
Enter the password to access the server.
Available number of characters: 0 - 32 characters
Unavailable characters: " &
[Sender’s E-mail address]
Enter the E-mail address of a sender.
The entered E-mail address will be displayed in the “From” (sender) line of the sent E-mails.
Available number of characters: 3 - 128 characters
Available characters: Alphanumeric characters, the at sign (@), the period (.), the underscore (_), and
the hyphen (-).
17.2 Configure the settings relating to the FTP server
[FTP]
Click the [FTP] tab on the “Server” page. (®page 46, page 48)
The settings relating to the FTP server used to transmit the alarm images can be configured on this page.
144 Operating Instructions
17 Configure the settings of the servers [Server]