Filter
Top Products
11.8 Adjust the zoom and focus (SW316L, SW316)
Click the [Setup>>] button of “Zoom/Focus adjustment” on the [Image quality] tab of the “Image/Audio” page.
(®page 92)
It is possible to adjust the angular field of view and the focus of the lens using the zoom/focus function.
Zoom/Focus adjustments
It is possible to adjust the angular field of view using the zoom and the extra optical zoom.
Adjust the focus setting by moving the lens focus to the appropriate position.
Manual and auto adjustments are available.
[Zoom ratio designation]
The zoom and focus can be adjusted at the same time.
Operate the slider to enlarge/reduce the angular field of view adjustment outline in the image. When adjusting
the zoom ratio to the “Tele” side, only the angular field of view adjustment outline is reduced, and it is possible
to determine the zoom ratio while checking the angular field of view after zooming is performed. When adjusting
the zoom ratio to the “Wide” side, the image itself is zoomed out of or the angular field of view adjustment
outline is enlarged, and it is possible to determine the zoom ratio while checking the image size after zooming
is performed. After the angular field of view adjustment outline is adjusted, zooming is performed, and the auto
focus function starts to automatically adjust focus based on a subject located in the center of the screen by
clicking the [Execute] button.
Operating Instructions 121
11 Configure the settings relating to images and audio [Image/Audio]