Panasonic WV-SW115 Security Camera User Manual


 
Available number of characters: 1 - 32 characters
Unavailable characters: " & * / : ; < > ? \ |
Default: None (blank)
[Post alarm]
Transmission interval
Select the transmission interval for the alarm image transmission to the FTP server from the following.
0.1fps/ 0.2fps/ 0.33fps/ 0.5fps/ 1fps
Default: 1fps
Number of images
Select the number of images to be transmitted from the following.
1pic/ 2pics/ 3pics/ 4pics/ 5pics/ 6pics/ 7pics/ 8pics/ 9pics/ 10pics/ 20pics/ 30pics/ 50pics/ 100pics/ 200pics/
300pics/ 500pics/ 1000pics/ 2000pics/ 3000pics
Default: 100pics
Recording duration
Approximate time to be taken to save the set “Number of images” with the set “Transmission interval” will
be displayed.
[Image capture size]
Select the capture size of images to be transmitted to the FTP server or of an image to be attached to the
alarm E-mail.
Aspect ratio
SW355
SW355
SW352
SW352
SF346
SF346
SF342
SF342
SF335
SF335
SW316L
SW316L
SW316
SW316
SW314
SW314
SP306
SP306
SP305
SP305
SP302
SP302
SW155
SW155
SW152
SW152
SF135
SF135
SF132
SF132
SP105
SP105
SP102
SP102
SW115
SW115
Aspect ratio 4:3 QVGA/VGA/800x600
*1
/1280x960
*2
Aspect ratio 16:9 320x180/640x360/1280x720
*2
Picture (Camera) mode
NP502
NP502
1.3 mega pixel (VGA) [4:3] QVGA/VGA/1280x960
1.3 mega pixel (800x600) [4:3] QVGA/800x600/1280x960
1.3 mega pixel [16:9] 320x180/640x360/1280x720
3 mega pixel [4:3] VGA/1280x960
3 mega pixel [16:9] 320x180/640x360
Default: VGA
[Image compression rate upon alarm detection]
Select “On” or “Off” to determine whether or not to change the image quality of “Quality1” (®page 77) upon
alarm detection.
On: Images will be transmitted with the image quality selected for “Image quality upon alarm detection”.
Off: Does not change the image quality upon alarm detection.
Default: Off
[Image quality upon alarm detection]
Image quality can be changed upon an alarm occurrence. Select the image quality from the following.
0 Super fine/ 1 Fine/ 2/ 3/ 4/ 5 Normal/ 6/ 7/ 8/ 9 Low
138 Operating Instructions
13 Configure the alarm settings [Alarm]