Filter
Top Products
16 C2946M-D (6/08)
Setup Menus
The C10CH Series camera uses setup menus instead of hardware switches for configuring the camera. As a result, you have more options for
customizing the camera for its specific application.
NOTES:
• After you customize any aspect of the C10CH Series camera, be sure to save your custom settings. (Refer to Profiles on page 18 for
information about saving custom settings.)
• FLICKERLESS changes to SHUTTER SPEED when AUTO EXPOSURE mode is set to MANUAL.
ALL SETTING ARE
INITIALIZED
OK CANCEL
RESTORE FACTORY SETTING
-> OFFTITLE
EDIT TITLE
BACK EXIT
TITLE
-> OFF
-> -2
-> 0
MASK
MASK COLOR
MASK EDIT
MASK ERASE
BACK EXIT
MASKING
-> AUTO
-> 38
LINE SYNC
V-PHASE ADJ
BACK EXIT
LINE SYNC
-> OFF
-> 17
-> 4
ECLIPSER
THRESHOLD
LEVEL
BACK EXIT
ECLIPSER
#.##
#.##
->
FIRMWARE VERSION
OSD VERSION
RESTORE FACTORY SETTINGS
BACK EXIT
SYSTEM INFORMATION
COVER THE LENS
AND PRESS OK
OK CANCEL
PIXEL CORRECTION
CURRENT SETTING
ARE SAVED
OK CANCEL
SAVE AS CUSTOM
-> AUTO
-> AUTO
->
-> 60%
-> SHARP
-> SHORT
->
->
LINE SYNC
WHITE BALANCE
CHROMA
GAMMA
SHARPNESS
CABLE COMPENSATION
MASKING
TITLE
BACK EXIT
FUNCTION SET.
-> ESC
-> OFF
-> -8
-> OFF
-> LOW
AUTO EXPOSURE
ECLIPSER
DC IRIS LEVEL
FLICKERLESS
AGC
BACK EXIT
EXPOSURE SET.
STANDARD
GAMING
CUSTOM
BACK EXIT
PROFILES
EXIT
->
->
->
->
->
->
PROFILES
EXPOSURE SET.
FUNCTION SET.
SAVE AS CUSTOM
PIXEL CORRECTION
SYSTEM INFORMATION
MAIN MENU
ABCDEFGHIJKLM
NOPQRSTUVWXYZ
abcdefghijklm
nopqrstuvwxyz
123456789-/
BS
RETURN
TITLE EDIT
SELECT START POSITION
NOW POINT = ( XXX, XXX )
MASK SETTING