Pelco C2953M-B Security Camera User Manual


 
C2953M-B (10/09) 55
Handlers
Figure 36. New Event Handler Page
Event handlers are the actions that the camera takes when an event occurs. The camera supports four event handlers.
Send Email: Sends an email to a defined email address when an event is activated. The SMTP server must be configured to accept the camera
IP address.
Write JPEG to SD Card: Saves a JPEG of the activated event to a mini SD card. An SD card must be installed in the device for this handler to
function.
NOTE: The mini SD card must be formatted as FAT32. Other formats are not compatible with the camera.
Upload JPEG to FTP Server: Saves a JPEG of the activated event to a defined FTP server.
Refer to the following sections for more information:
Creating an Alarm Event Source on page 56
Creating a System Event Source on page 56
Creating a Timer Event Source on page 56
Editing an Event Source on page 56
Deleting an Event Source on page 57
Creating an Event Handler: Send Email on page 57
Creating an Event Handler: Write JPEG to SD Card on page 58
Creating an Event Handler: Upload JPEG to FTP Server on page 58
Creating an Event Handler: Open/Close Relay on page 59
Editing an Event Handler on page 59
Deleting an Event Handler on page 59
Example Handler Filter Setup on page 60