Filter
Top Products
6 C2969M-B (8/10)
Installation
This guide provides instructions on installing the IE or IEE Series network dome camera in a suspended
ceiling or a fixed ceiling/wall. For detailed instructions, refer to the IE Series Installation/Operation
manual or the IEE Series Installation/Operation manual. Both are available on the resource disc.
You can also install the IE or IEE Series network dome camera using one of the following methods:
• Installation using the IE-S surface mount accessory (not supplied). For surface mount installation
instructions, refer to the documentation supplied with the surface mount.
• Installation using the IE-P pendant mount accessory (not supplied). For pendant mount installation
instructions, refer to the documentation supplied with the pendant mount.
ORIENTING THE CAMERA
Before attaching the dome camera to the mounting surface, be sure to properly orient the camera to
ensure that the video is right-side-up when viewed. The IMAGE UP mark on the camera module should be
above the lens, and the lens connector should be below the lens when you are looking directly at the
camera (refer to Figure 2).
NOTE: Improper camera orientation can also be corrected using the Web interface.
Figure 2. Orienting the Camera
ì
IMAGE UP Mark
î
Lens Connectors