6 C3401M-A (1/06)
Installation
The following parts are supplied with the Spectra Mini dome system:
1 Dome drive
1 Dome bubble with trim ring
1 Interface cable with a male RJ45-10 connector on one end and four twisted wire pairs on the other end
1 Cover for use with optional translator board
2 #10 x 1.50-inch self-tapping screws for suspended ceiling installation
2 #8 x 3.50-inch self-tapping screws for surface mount installation
1 Installation manual
1 Operation/Programming manual
1 Template
The following parts, in addition to normal installation tools, are needed but not supplied:
1 Small flashlight for viewing switches
1 Long-handled flat-blade screwdriver for setting switches
2 6-32 toggle bolts for surface mount installation
2 8-32 studs and nuts for surface mount installation to concrete
2 3-16 toggle bolts for recessed installation in hard ceiling
Figure 1.
Package Components
MANUALS
INTERFACE CABLE
AND RJ45-10
CONNECTOR
DOME DRIVE TRIM RING AND
BUBBLE
1.5-INCH SELF-TAPPING
SCREWS, 2 EA.
3.5-INCH SELF-TAPPING
SCREWS, 2 EA.
TRANSLATOR BOARD
COVER