Filter
Top Products
12 C3453M-B (4/09)
Specifications
MODELS
*Enclosure power consumption does not include camera wattage.
MECHANICAL
Camera Mounting Single slot for adjustable camera positioning on snap-in camera sled
Camera and Lens Size Accepts camera and lens combinations
†
(including BNC connector) up to 9.00" L x 2.87" W x 3.00" H
(22.86 x 7.28 x 7.62 cm)
Viewing Window 0.118-inch (3 mm) thick scratch-resistant Lexan
®
Viewing Area 2.81" W x 2.47" H (7.14 x 6.27 cm)
Cable Entry 1 x PG9 and 1 x PG11 compression glands on bottom; PG9 0.312-inch (0.8 cm) and PG11 0.395 (1.0 cm)
maximum cable diameters
Cable Entry Holes 1 x 0.750-inch (1.91 cm) diameter and 1 x 0.630-inch (1.6 cm) diameter;
0.750-inch hole will accept 1/2-inch NPT conduit fitting when enlarged to 0.875-inch;
0.630-inch hole will accept 1/4-inch NPT conduit fitting
Lid Fastening 3 Allen-head screws
GENERAL
Construction Die-cast aluminum
Finish Alodine with gray polyester powder coat
Environment
‡
Indoor/outdoor ambient temperature -10° to 120° F (-23° to 49° C)
Unit Length
Base 13.38 inches (33.99 cm)
Overall 14.39 inches (36.55 cm)
Model Number
Basic Enclosure
120VAC with
24VAC Camera Power
24VAC with
24VAC Camera Power
230VAC with
24VAC Camera Power
Heater/Blower
EM1512 Feed Through
Wall Mount
Sun Shroud
Enclosure Power
Consumption*
Maximum Power
Consumption Capacity
EH1512
•
EH1512MT
••
EH1512-1
• • • 12 W 25 W
EH1512-2
••• 12 W
EH1512-3
• • • 12 W 25 W
EH1512-1MT
•• •• 12 W25 W
EH1512-2MT
••••12 W
EH1512-3MT
• ••• 12 W25 W
EH1512-1MTS
•• •••12 W25 W
EH1512-2MTS
• • •••12 W
EH1512-3MTS
• ••••12 W25 W
*Maximum recommended camera power consumption is 6.7 watts.
†
Assumes the lens is fully extended.
‡
Check the environmental specification of your specific camera/lens.