Filter
Top Products
C3453M-B (4/09) 5
PACKAGE CONTENTS
NOTE: A metric Allen wrench (5 mm) is required for installation but is not included. A Phillips screwdriver, flat head screwdriver, or 1/4-inch nut
driver is needed for the EH1512-1 and EH1512-3 only. The Allen wrench is needed to open and close the enclosure and to secure the enclosure to
all mounts. It is also needed to secure the pan/tilt (swivel head) on the EM1512 mount.
The following items are supplied:
Figure 1. Package Contents
Qty Description
1 EH1512 Series enclosure
1 Screw, 1/4-20 x 3/8-inch, Phillips
1 Washer, 1/4-inch split lock
2 Screws, M6 x 1.0 P x 12 mm, hex socket cap
2 Washers, 6 mm split lock
1 Gland and nut, PG9 cable
1 Gland and nut, PG11 cable
1 Wire tie, 4-inch (EH1512-1 and EH1512-3 only)
1 Installation manual
1 EM1512 mount (optional)
1 SS1512 sun shroud (optional)
SHIPPING BOX
WIRE
TIE
1 EA.
HEX SOCKET
CAP SCREW
2 EA.
6MM
SPLIT
WASHERS
2 EA.
PHILLIPS
SCREW
1 EA.
GLANDS AND NUTS
2 EA.
EH1512 ENCLOSURE
1 EA.
1/4-INCH
SPLIT
WASHER
1 EA.
SUN SHROUD
1 EA.
(OPTIONAL)
MOUNT
1 EA.
(OPTIONAL)