Filter
Top Products
Pelco Manual C1986M-B (11/03) [ 15 ]
SPECIFICATIONS
GENERAL
CCD Sensor: 1/3-inch
Picture Elements
CC3700S-2: 510 (H) x 492 (V)
CC3700H-2: 768 (H) x 494 (V)
Sensing Area: 6mm diagonal
Synchronization System: AC line lock or internal oscillator
Horizontal Resolution
CC3700S-2, CC3700S-2X: 330 TV lines
CC3700H-2, CC3700H-2X: 480 TV Lines
Iris Control: Electronic/passive
Minimum Illumination
CC3700S-2, CC3700S-2X: 0.5 lux at 50 IRE, f1.2 with 80% scene reflection
CC3700H-2, CC3700H-2X: 0.7 lux at 50 IRE, f1.2 with 80% scene reflection
Signal-to-Noise Ratio: 52 dB (AGC Off)
Gain Control: Automatic
Vertical Phase: Adjustable 0° ±120°
Automatic Gain Control: Selectable by DIP switch setting
Backlight Compensation: Selectable by DIP switch setting
Scanning System: 525 lines, 2:1 interlace
Signal Processing: DSP
Auto Iris Lens Type: DC/video control
Video Output: 1 Vp-p, 75 ohms
Iris Control Range: 1/60 to 1/100,000 second
Auto White Balance Range: 2500-9500° K
ELECTRICAL
Power Requirements: 11-40 VDC or 14-30 VAC
Power Consumption: Less than 6.5 watts
Power Connector: 2-pin terminal strip, push-in type, with screw lock
Video Connector: BNC
Lens Jack: 4-pin connector (miniature square)
MECHANICAL
Lens Mount: C/CS mount (adjustable)
Camera Mount: Use 1/4-20 screw, top or bottom of camera housing
ENVIRONMENTAL
Operating Temperature: 14° to 122°F (-10° to 50°C)
Storage Temperature: 14° to 158°F (-10° to 70°C)
PHYSICAL
Physical Dimensions: 2.48 (W) x 2.67 (H) x 4.33 (D) inches (6.3 x 6.8 x 11 cm)
Weight (without lens): 0.77 lb (0.35 kg)
(Design and product specifications subject to change without notice.)