Filter
Top Products
4 C2912M-A (2/05)
Setup
SELECTING VIDEO FORMAT (CST150)
A switch for selecting the video format for the microdisplay on the CST150 is located in the battery
compartment.
To select the video format:
1. Remove the battery compartment cover. You may have to use a small screwdriver.
2. Remove the batteries.
3. Use a pen or small screwdriver to move the switch to either NTSC or PAL.
4. Reinstall the batteries. Make sure you orient the batteries according to the + and – symbols in
the compartment for each battery.
5. Reinstall the battery compartment cover.
Figure 2.
Video Format Switch