Filter
Top Products
C2446M-E (11/05) 17
BACK
EXIT
AUTO FOCUS ON
ZOOM LIMIT X128
ZOOM SPEED MEDIUM
LOW LIGHT LIMIT 2
<ADVANCED SETTINGS>
CAMERA
DOME SETTINGS
Camera
AUTO FOCUS
Auto focus allows the lens to remain in focus during zoom-in, zoom-out, and motion functions.
There are two auto focus settings:
ON (default) If auto focus mode is set to ON, the camera will focus
automatically when using pan, tilt, and zoom functions.
OFF Focus is operated manually. To focus, press the Focus Far or Focus
Near button on the controller.
ZOOM LIMIT
Zoom limit allows the user to define a limitation on the amount of telephoto zoom. The default
setting is 128X.
Cameras with 128X zoom (16X optical zoom and 8X digital zoom) can be set for 16X, 32X, 64X, or
128X.
ZOOM SPEED
Zoom Speed allows the user to define how fast the dome will go from full wide zoom to the 16X
optical zoom. The default setting is MEDIUM.
Available settings for zoom speed include the following:
HIGH 1.9 seconds
MEDIUM (default) 3.6 seconds
LOW 6 seconds
NOTE: When using the HIGH setting, the image may be out of focus until zooming stops.
LOW LIGHT LIMIT
Low light limit is the maximum duration, in fractions of a second, that the electronic shutter will
remain open in low light conditions. The default setting is 2.
Settings include the following:
2 =1/2 second 8 = 1/8 second 30 =1/30 second
4 = 1/4 second 15 =1/15 second 60 =1/60 second
EXIT
SPECTRA III
LANGUAGE ENGLISH
<SYSTEM INFORMATION>
<DISPLAY SETUP>
<DOME SETTINGS>
ACK ALERT*
RESET CAMERA
CYCLE CAMERA POWER
REBOOT SYSTEM
<CAMERA>
<MOTION>
<POWER UP>
<LINE SYNC>
<PRESETS>
<PATTERNS>
<ZONES>
<TITLE TEXT>
<ALERT>*
<CLEAR>
<PASSWORD>
BACK
EXIT
DOME SETTINGS
*This setting only applies to
Pressurized Spectra III dome
systems with software version
1.25 or higher.
(See page 11)
Quick Programming Guide