Filter
Top Products
C2446M-E (11/05) 29
Patterns
A pattern is a memorized, repeating, series of pan, tilt, zoom and preset functions that can be
recalled with a command from a controller or automatically by a programmed function (alarm,
park or power-up).
The Spectra III can handle one user-defined pattern. Pattern length is based upon memory usage
rather than a fixed amount of time.
To program a pattern:
1. Use the joystick to position the cursor beside PROGRAM PATTERN.
2. Press Iris Open. The Patterns programming window appears on the monitor.
3. Follow the directions displayed on the monitor.
After a pattern is programmed, the remaining storage percentage is displayed on the screen.
To clear a pattern:
1. Use the joystick to position the cursor beside CLEAR PATTERN.
2. Press Iris Open.
3. Follow the directions displayed on the monitor.
NOTE: When programming one or more presets within a pattern, use the normal controller
commands to Call a Preset.
PATTERN NUMBER 1
<PROGRAM PATTERN>
<CLEAR PATTERN>
BACK
EXIT
REFERENCE INFORMATION
PATTERN USAGE 0%
REMAINING 100%
PATTERNS
EXIT
SPECTRA III
LANGUAGE ENGLISH
<SYSTEM INFORMATION>
<DISPLAY SETUP>
<DOME SETTINGS>
ACK ALERT*
RESET CAMERA
CYCLE CAMERA POWER
REBOOT SYSTEM
BACK
EXIT
<CAMERA>
<MOTION>
<POWER UP>
<LINE SYNC>
<PRESETS>
<PATTERNS>
<ZONES>
<TITLE TEXT>
<ALERT>*
<CLEAR>
<PASSWORD>
DOME SETTINGS
*This setting only applies to
Pressurized Spectra III dome
systems with software version
1.25 or higher.
(See page 11)
Quick Programming Guide