Filter
Top Products
PELCO Manual C460M-E (7/95) 9
4.4.1.2 Corner Mounting
The ED28/ED2820 series may be mounted to the out-
side corner of a structure using the CM100 Corner
Mount Adapter.
To attach the enclosure to an outside corner, perform the
following steps (see Figure 10):
1. Secure the CM100 corner mount adapter as stated
in the installation manual provided with the mount.
2. Mount the enclosure to the CM100 using four (4)
1/4-inch diameter fasteners.
3. Route the power cord and control cables through
the hole in the mount arm and make the necessary
connections.
4. Install the pan/tilt with the camera/lens mounted.
Figure 10. Corner Mounting