Pelco ED29/ED2920 Security Camera User Manual


 
PELCO Manual C460M-E (7/95) 3
4.0 INSTALLATION
4.1 UNPACKING INSTRUCTIONS
The dome and enclosure are shipped in separate cartons.
Make sure you have both before installing. Save the
shipping cartons and plastic packaging in case any part
of the unit has to be returned for credit or repair.
4.2 CONDUCTOR REQUIREMENTS
ED28
ED29 See the camera manufacturer’s speci-
fications sheet.
ED28-1
ED29-1
ED29-3 Two (2) conductor, plus ground for
heater/blower and recommended con-
ductors for camera
ED2820, ED2820-3
ED2920, ED2920-3
ED2820-SL
ED2920-SL Eleven (11) plus ground for pan/tilt,
lens and camera AC, plus two (2) for
heater/blower
ED2820-3SL/PP
ED2820SL/PP Twenty (20), plus ground for pan/tilt,
lens and camera AC, plus two (2) for
heater/blower
ED2820-PP Nineteen (19) plus ground for pan/
tilt, lens and camera AC, plus two (2)
for heater/blower
ED2820-RX
ED2820SL-RX Coax cable and 120 VAC power cord
ED2820-RX/PP
ED2820SL-RX/PP Same as ED2820-RX plus 10 con-
ductors for alarms
ED2820-WX
ED2820SL-WX Twisted pair, coax, and 120 VAC
power cord
Figure 2. ED29/ED2920 Series Dimension Drawing