Filter
Top Products
C494M-D (1/96) 3
Description
The HS2000 high security camera enclosure is designed for indoor “corner mount” installation for such applications as elevators, parking
garages, classrooms, offices, detention cells, etc., requiring maximum protection from vandalism in an unobtrusive package. Designed to fit flush
to the ceiling in a corner, an optional hood (HS2000H) allows the HS2000 to be mounted lower on the wall and still retain the enclosure’s
integrity. An impact-resistant clear Lexan
®
window is supplied, an optional smoked window is available.
Constructed of medium gauge steel, the HS2000 will accept many of the smaller CCD cameras with fixed focal length and auto-iris lenses. There
is no exposed mounting hardware securing the HS2000 to its mounting surface. Opening the enclosure can only be accomplished by removing
the tamper-resistant screw from the bottom. In addition, a factory-installed tamper switch is mounted on the secured access cover.
MODELS
HS2000 High security corner mount enclosure designed to fit flush with the ceiling. For use in applications such as elevators,
parking garages, classrooms, offices, detention cells, etc., requiring maximum protection from vandalism in an
unobtrusive package.
HS2000/BR Same as HS2000 except brass plated finish.
HS2000/CH Same as HS2000 except chrome plated finish.
OPTIONS
HS2000H Hood for mid-wall mounting of HS2000 enclosure.
HS200010019 Smoked window, 1/4" (6.35 mm) thick, impact and abrasion-resistant Lexan.