Filter
Top Products
C1300M-B (6/05) 13
Quick Programming Guide
(See Page 9)
System Information
The system Information screen displays ExSite model, software version, available memory, and
other diagnostic information.
System settings cannot be changed using this screen. This screen is for reference only.
Use the following steps to display the System Information screen:
1. Use the joystick to position the cursor beside SYSTEM INFORMATION.
2. Press Iris Open. The SYSTEM INFORMATION window opens.
*EAB (Enclosure Accessory Board): The EAB information screen displays availability, version, and
part number of the enclosure accessory board
**PMAB (Power Module Accessory Board): The PMAB information screen displays availability,
version, and part number of the power module accessory board.
EXIT
LANGUAGE ENGLISH
UNIT INVERSION OFF
<SYSTEM INFORMATION>
<DISPLAY SETUP>
<UNIT SETTINGS>
<POSITION CALIBRATION>
RESET CAMERA
CYCLE CAMERA POWER
REBOOT SYSTEM
PELCO EXSITE IPSXM
UNIT MODEL 1PSXM31CBW
POWER MODULE MEMORY AVAILABLE
SOFTWARE VERSION 0.90.9013
BIOS VERSION 8.00.9000
FONT VERSION 1.00
COMM 2400,N,8,1
D ADDRESS 1
P ADDRESS 2
CM9500 MODE OFF
32 PRESETS OFF
PROTOCOL D
<ADDITIONAL>
BACK
EXIT
SYSTEM INFORMATION
FREE MEMORY 30464
LAST RESET 3
AZIMUTH ZERO OFFSET 0.00°
MOTOR ACTIVE YES
CAMERA ACTIVE YES
FPGA VERSION 2
VIDEO LEVEL HIGH
CAMERA XXXX-XXXX
<EAB>*
<PMAB>**
LANGUAGE 1 ENGLISH 1.00
LANGUAGE 2 ESPANOL 1.00
LANGUAGE 3 ITALIANO 1.00
LANGUAGE 4 DEUTSCH 1.00
LANGUAGE 5 PORTUGUES 1.00
LANGUAGE 6 FRANCAIS 1.00
LANGUAGE 7 CESKY 1.00
LANGUAGE 8 POLSKI 1.00
LANGUAGE 9 RUSSIAN 1.00
LANGUAGE 10 TURKISH 1.00
BACK
EXIT
ADDITIONAL