Pentax 10997 Digital Camera User Manual


 
121
Shooting Functions
4
The shutter can be released from a distance by using an optional remote
control unit.
1
Mount the camera onto a tripod.
2
Press the four-way controller (5) in standby mode.
The Drive Mode setting screen appears.
3
Use the four-way controller (45) to select h.
4
Press the four-way controller
(3), use the four-way controller
(45) to select h or i, and press
the 4 button.
The remote control receiver on the front
of the camera will blink and the camera is
in a standby status.
5
Press the shutter release button halfway.
The autofocus system operates.
Shooting with a Remote Control Unit
(Optional)
h
Remote Control
The shutter is released immediately after the shutter
release button on the remote control unit is pressed.
i
Remote Control
(3 sec. delay)
The shutter is released about 3 seconds after the shutter
release button on the remote control unit is pressed.
Shooting with a remote control unit is not available in the following situations.
when \ (Moving Object)/Z (Pet)/R (Kids) of H mode is set
when Interval Shooting is set
CancelCancel
MENU
Remote ControlRemote Control
OKOK
OK