Pentax 10997 Digital Camera User Manual


 
133
Shooting Functions
4
When [Recording Sound Level] is set to a value other than l (0), the camera
operation sounds are also recorded. When recording a movie, mount the
camera onto a tripod and do not operate the camera while recording.
The flash is not available.
When recording a movie using an image processing function such as Digital
Filter, some frames may be omitted from the recorded movie.
If the internal temperature of the camera becomes high during movie
recording, the camera may be turned off automatically to protect the camera
circuitry.
When recording a movie, regardless of the focus mode setting, recording
starts when the shutter release button is pressed fully even if the subject is
not in focus.
You can record a movie continuously up to 4 GB or 25 minutes. When the SD
Memory Card is full, recording stops and the movie is saved.
The screen display in C mode is set according to the [Live View] setting
made in the [A Rec. Mode 4] menu. (p.107)
You can set the functions for when the front/rear e-dial is turned or the d
button is pressed in [E-Dial Programming] of the [A Rec. Mode 4] menu.
(p.164)
If you intend to shoot continuously for a long period, use of the optional AC
adapter kit is recommended.
You can also use an optional remote control unit to record a movie. (p.121)
Press the four-way controller (5) in C mode to display the screen for setting
whether to use the remote control instead of the normal Drive Mode setting
screen.