Filter
Top Products
220
Changing Additional Settings
7
2
Press the four-way controller (2) to select [Reset], and
press the 4 button.
The settings are reset, and the screen that was displayed before
selecting the menu item appears again.
You can check the version information for software (firmware) in the
camera. If an update file for the firmware is released, you can update the
camera to the latest firmware version.
1
Select [Firmware Info/Options] in the [R Set-up 4] menu,
and press the four-way controller (5).
The firmware version for the camera is
displayed on the [Firmware Info/Options]
screen.
At this point, if an update file is saved on
your SD Memory Card, you can run the
update.
2
Press the 3 button twice.
The screen that was displayed before selecting the menu item appears again.
Checking the Camera Version Information
Visit our website for more information and procedural details regarding
updates.
• You cannot restore a camera to its previous firmware version after updating
it.
• Before running the update, be sure to save the data on your SD Memory Card
to a computer or other location.
•
When the battery level is low, [Not enough battery power remaining to update
the firmware] is displayed on the monitor. Install a fully charged battery, or use
the optional AC adapter kit.
MENU
Firmware Info/OptionsFirmware Info/Options
CameraCamera
Ver:X.XXVer:X.XX