Filter
Top Products
72
3
Taking Pictures
2
Use the four-way controller (2345) to select R.
3
Press the 4 button.
R (Program) mode is selected and the
camera returns to capture status.
When the camera detects a face, the Face
Detection function is activated and the face
detection frame appears (p.69).
4
Set the functions you want to change.
Refer to “Setting the Shooting Functions” (p.97) for details on how to
set the functions.
5
Press the shutter release button halfway.
The focus frame on the display turns green when the camera focuses
on the subject at the correct distance.
6
Press the shutter release button fully.
The picture is taken.
In 9 (Green) mode, you can enjoy easy picture-taking using standard
settings, regardless of the settings in the [A Rec.Mode] menu.
9 mode settings are as shown below.
Taking Pictures in the Basic Mode (Green Mode)
Flash Mode , (Auto)
Shadow Correction
P (Off)
Drive Mode 9 (Standard) Shake Reduction O (On)
Focus Mode = (Standard)
Face Recall Functional
Information Display Normal Face Detection O (On)
Recorded Pixels m (4608×3456) Blink Detection O (On)
White Balance F (Auto) Digital Zoom O (On)
Focusing Area J (Multiple) Sharpness G (Normal)
Focus Assist O (On) Saturation G (Normal)
Sensitivity AUTO Contrast G (Normal)
AUTO ISO Range ISO100-800 Date Imprint Off
EV Compensation ±0.0
Electronic Level O (On)
Highlight Correction
P (Off)
02/02/2012
02/02/2012
38
38
14:25
14:25
14:25