Filter
Top Products
221
Using the Flash
9
You can use the P-TTL auto flash with an AF540FGZ, AF360FGZ,
AF200FG or AF160FC flash unit.
1
Remove the cover of the hot shoe, and attach the external
flash.
2
Turn on the camera and the external flash.
3
Set the external flash mode to [P-TTL].
4
Make sure that the external flash is fully charged, and then
take a picture.
Using the P-TTL Auto Flash
• The P-TTL auto flash is only available with an AF540FGZ, AF360FGZ,
AF200FG or AF160FC flash unit.
• For details such as operation method and effective distance, refer to the
external flash manual.
• The flash does not discharge if the subject is bright enough when the flash
mode is set to C or i. Therefore, these modes may not be suitable for
daylight-sync shooting.
• Even if the K/i button is pressed, the built-in flash does not pop up when
an accessory is attached to the hot shoe of the camera.