Filter
Top Products
100
3
Taking Pictures
4
Use the four-way controller (23)
to change the sensitivity.
5
Press the 4 button.
The setting is saved.
6
Press the 3 button.
The camera returns to capture status.
The S1 comes with a Face Detection function that spots the faces in your
shot and automatically adjusts the focus and exposure for the faces. It
will automatically release the shutter when people are smiling, or if
anyone blinked, it will tell you that so you can take the shot again until it
is perfect. The default setting is [On] for [Face Detection] and O (On) for
[Blink Detection].
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
Use the four-way controller (23) to select [Face
Detection].
• When the sensitivity is set to 3200 or 6400, the number of recorded
pixels is fixed at f (2592×1944).
•In 9 (Green) mode or when recording a movie, only [Auto] (sensitivity
64 - 800) is available.
•In c (Digital SR) mode, only [Auto] (sensitivity 64 - 6400) is
available.
•In S (Fireworks) mode, the sensitivity is fixed at the minimum value.
• If you change the [Sensitivity] setting frequently, you can save time by
assigning it to the Green button (p.107).
Saving the Sensitivity setting 1p.113
Switching the Face Detection Function
Rec. Mode
1/3
OK
OK
MENU
Cancel
400
200
100
64
EV Compensation
Recorded Pixels
White Balance
AE Metering
Sensitivity
Focusing Area
Auto