Filter
Top Products
23
* A2 varies depending on the [Face Detection] setting in the [A Rec.
Mode] menu.
If set to [Off], nothing appears in A2.
* A3 varies depending on the [D-Range Setting] setting in the [A Rec.
Mode] menu.
If [Highlight Correction] and [Shadow Correction] are both set to P
(Off), nothing appears in A3.
* A4 varies depending on the following conditions.
* B2 and B3 appear only when the shutter release button is pressed
halfway.
* When the shooting mode is b (Auto Picture) and if you press the
shutter release button halfway, the automatically selected shooting
mode appears in A1 even when “No Info” is selected (p.70).
* Some indications may not appear depending on the shooting mode.
A1
Shooting mode (p.67)
A11
Battery level indicator (p.35)
A2
Face Detection mode (p.69)
A12
Recorded Pixels (p.92)
A3
D-Range Setting (p.95)
A13
White Balance (p.96)
A4
Shake Reduction setting (
p.102
)
A14
AE Metering (p.98)
A5
Flash Mode (p.88)
A15
Sensitivity (p.99)
A6
Drive Mode (p.84, p.85)
A16
Histogram (p.26)
A7
Focus Mode (p.89)
A17
EV Compensation (p.94)
A8
Digital Zoom/
Intelligent Zoom icon (p.73)
A18
Date Imprint setting (p.106)
B1
Focus frame (p.64)
A9
Memory status (p.40)
B2
Shutter s
peed
A10
Remaining image storage capacity
B3
Aperture
I When [Face Detection] is set to [On]
J When [Face Detection] is set to [Smile]
P When [Highlight Correction] is set to O (On)
Q When [Shadow Correction] is set to O (On)
O
When [Highlight Correction] and [Shadow Correction] are both set to O
(On)
M When [Shake Reduction] in the [A Rec. Mode] menu is set to O (On)
l
When [Shake Reduction] is set to P (Off) (If the camera shake is likely to
occur, f is indicated when the shutter button is pressed halfway.)