Pentax 16926 Digital Camera User Manual


 
108
3
Taking Pictures
In this mode, a set number of pictures can be taken automatically at a
set interval from a set time.
1
Press the four-way controller (2) in A mode.
The [Drive Mode] screen appears.
2
Use the four-way controller
(45) to select k (Interval
Shoot) and press the
4
button.
The current interval shoot settings
appear for approximately 1 minute. To
take pictures with the current settings,
go to step 10.
3
Press the 4 button while the settings are displayed.
The [Interval Shoot] setting screen appears. [Interval] is marked with
the frame.
4
Set the interval.
1
Press the four-way controller
(5).
2 Use the four-way controller (23)
to set the minutes, then press the
four-way controller (5).
3 Use the four-way controller (23)
to set the seconds, then press the four-way controller (5).
The frame returns to [Interval].
5
Press the four-way controller (3).
The frame moves to [Number of Shots].
Taking Pictures at a Set Interval (Interval Shoot)
Interval 10 sec. – 99 min.
Set the camera to take pictures at intervals. The
intervals can be set in increments of one second from
ten seconds to 4 minutes, or in 1 minute increments
from 4 to 99 minutes. You cannot set the camera to
take interval shots at less than ten seconds.
Number
of Shots
2 shots – number of
recordable images
You can set this to up to 1000 shots. However, it
cannot exceed the number of recordable images.
Start Delay 0 min. – 24 hours
You can set 1 minute increments for the first 59
minutes and 1 hour increments from there. If the
start time is set to 0 minutes, the first picture is taken
as soon as the shutter release button is pressed.
MENU
MENU
Cancel
Cancel
MENU
Cancel
OK
OK
OK
OK
OK
OK
Drive Mode
Drive Mode
Drive Mode
Interval Shoot
Interval Shoot
Interval Shoot
MENU
Interval
Number of Shots
Start Delay
min.
0
hr.
0
min.
0
2
sec.
10
Interval Shoot