Filter
Top Products
135
3
Taking Pictures
You can set this function to correct for camera shake when taking still
shots. If Pixel Track SR is set to O (On), the camera automatically
corrects for camera shake in the images you shot. The default setting is
P (Off).
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
Use the four-way controller (23) to select [Pixel Track
SR].
3
Use the four-way controller
(45) to switch between
O (On) or P (Off).
O(On) Automatically corrects
for camera shake.
P (Off) No correction for
camera shake.
The setting is saved.
4
Press the 3 button.
The camera returns to capture mode.
D-Range settings are not applicable in b (Auto Picture)/9 (Green)
modes.
Setting Pixel Track SR
Shake reduction settings in C (Movie) and (Underwater Movie)
mode are configured under Movie SR (p.153).
•In 9 (Green), X (Digital Wide), F (Digital Panorama), C (Movie),
(Underwater Movie), N (Frame Composite) and S (Fireworks)
mode, the Pixel Track SR is fixed at P (Off).
• Pixel Track SR does not function when the flash discharges even if
[Pixel Track SR] is set to O (On).
The Pixel Track SR may not be effective when the shutter speed is slow.
We recommend you turn off the [Pixel Track SR] setting P (off) and use
a tripod for slow shutter speeds.
Rec. Mode
2/4
MENU
Exit
ISO80-800
AUTO
0.0
Pixel Track SR
Sensitivity
AUTO ISO Range
Movie
EV Compensation
D-Range Setting