Filter
Top Products
129
3
Taking Pictures
6
Press the 3 button.
The camera returns to capture mode.
Refer to the following “Manual Setting” for instructions on adjusting the
white balance manually.
Have a blank sheet of white paper or similar material ready.
1
In the [White Balance] screen, use the four-way
controller (23) to select K (Manual).
2
Point the camera at the blank
sheet of paper or other
material so that it fills the
frame displayed in the center
of the screen.
3
Press the shutter release button fully.
The white balance is automatically adjusted.
4
Press the 4 button.
The setting is saved and the screen returns to the [A Rec. Mode]
menu.
5
Press the 3 button.
The camera returns to capture mode.
If you change the [White Balance] setting frequently, you can save time
by assigning the Fn settings to the Green button (p.139).
Saving the White Balance setting 1p.158
Manual Setting
OK
OK
OK
OK
MENU
MENU
Cancel
Cancel
OK
OK
MENU
Cancel
White Balance
AdjustAdjust
Adjust
SHUTTER
SHUTTER
Adjust
SHUTTER