Filter
Top Products
29
* A12 changes as follows depending on the [Eye-Fi] setting in
[W Setting] menu.
During Eye-Fi communication. The camera is communicating or
searching for the access point when [Eye-Fi] is set to O (on).
Eye-Fi communication waiting. The camera is not communicating
when [Eye-Fi] is set to O (on).
Eye-Fi communication prohibited. [Eye-Fi] is set to P (off).
Eye-Fi version error. The version of the Eye-Fi card is out of date.
* A17 depends on the [D-Range Setting] setting in the [A Rec. Mode]
menu.
P When [Highlight Correction] is set to O
Q When [Shadow Correction] is set to O
O When [Highlight Correction] and [Shadow Correction] are both
set to O
If [Highlight Correction] and [Shadow Correction] are both set to
P (Off), nothing appears in A17.
* A22 changes as follows depending on [GPS] setting in [WSetting] menu.
[GPS Setting] is set to O (On) in [GPS], and the GPS data is
received.
[GPS Setting] is set to O (On) in [GPS], but GPS data is not
received.
GPS Error (*)
(*) To recover from an error, turn off the camera, remove and
then re-insert the battery and turn on the camera again. If
is still displayed, the built-in GPS unit may be malfunctioning.
Contact your nearest PENTAX Service Center.
No GPS status icon is displayed on the screen when [GPS Setting] is
set to P (Off).
* B1 and B2 are only displayed when the shutter release button is
pressed half-way.
* When the shooting mode is b (Auto Picture) and if you press the
shutter release button halfway, the automatically selected shooting
mode appears in A1 even when “No Info” is selected (p.84).
* Some indications may not appear depending on the shooting mode.
GPS
GPS
GPS
GPS
GPS
GPS
GPS
GPS
GPS
!
GPS
GPS
GPS
!