Pentax 57233 Digital Camera User Manual


 
149
BASIC OPERATION
(PREPARATION)
BASIC OPERATION
(SHOOTING)
ADVANCED OPERATIONSOTHERS
Self-timer Electronically controlled with delay time of 12 sec. or or 2 sec. with
mirror lock up in used. Start by pressing shutter release button.
Operation confirmation: Possible to set PCV beep tone. Cancellable
after operation
Auto Bracket Three frames consecutive shots with exposure bracketing in ±0.3,
±0.5 ±1 EV
Mirror Quick-return mirror with AF secondary mirror
Film Loading Film advances automatically to 1st frame after back cover is closed.
Film information window is provided.
Film Wind & Auto wind/rewind by built-in motor, Consecutive or Single advance
Rewind mode, Approx. 2.5 frame/sec. (consecutive mode), Auto rewinding
starts at end of roll, Film rewind/completion of rewinding is displayed
on the LCD panel, Mid-roll rewind
Exposure Meter TTL multi(16)-segment metering, Metering range from EV0 to EV21 at
ISO100 with 50mm f/1.4 lens, Center-weighted and Spot metering
mode can be set.
Exposure ±3 EV in 0.5 EV step increments
Compensation
AE lock Exposure is memorized for 20 seconds
Flash Series-control, Auto-popup TTL Auto Flash (RTF), Guide number: 11
(ISO100/m), Illumination angle covers 28mm lens angle of view, Flash-
sync-shutter in the range from 1/125 sec. to a slower speed, Day-light-
sync flash, Slow-shutter-sync flash, Contrast-control-sync flash (ISO
range = 25 800), Automatic flash function (automatically retracted
when the power is turned off), Red-eye reduction flash function
Flash sync Hot shoe with X-contact, which couples with Pentax dedicated auto
flashes, ISO range = 25-800, Automatic flash, Red-eye reduction flash
function. Possible to use high-speed sync, wireless flash mode, P-TTL
mode with AF360FGZ.
Custom Function 17 functions can be set.
Power Source Two 3V lithium batteries (CR2 or equivalent), auto power off after 3
min.
Battery Exhaustion
Battery exhaustion symbol is lit. (The shutter is locked and no
indication in the viewfinder when starts blinking.)
Date module Crystal quartz controlled, LCD with digital clock, auto calendar,
Imprinting mode 1 Year/Month/Day 2 Day/Hour/Minute
3 ---- (No imprint) 4 Month/Day/Year
5 Day/Month/Year
ISO range ISO 25-5000 (Automatic setting)
Dimension and 122mm (W) x 84mm (H) x 63.5mm (D) (4.8"x3.3"x2.5")
Weight 335g (11.8 oz) body only without batteries
SPECIFICATIONS AND EXTERNAL DIMENSIONS ARE SUBJECT TO CHANGE WITHOUT
NOTICE.