Filter
Top Products
59
BASIC OPERATION
(PREPARATION)
BASIC OPERATION
(SHOOTING)
ADVANCED OPERATIONSOTHERS
Remote Control Shooting
The shutter will be released 3 seconds after the optional remote
control’s shutter release button is pressed.
1 Mount the camera to a tripod.
• If you use a large tripod, be sure to install
the supplied auxiliary tripod plate between
the camera and pan/tilt tripod head,
otherwise the pan/tilt tripod head may
contact the lens.
2 Press the drive mode button
until appears on the LCD
panel.
Confirm that the subject is in
focus by pressing the shutter
release button halfway down.
• Remote control operation does not activate
focusing with the default setting. Use custom
function number [CF14] to focus
automatically with remote control operation.
See pages 134 and 141.
3 Press the shutter release
button on the remote control
toward the camera.
The self-timer lamp blinks and the
audible PCV signal sounds during
remote control shooting.