Pentax 8587 Digital Camera User Manual


 
120
3
Taking Pictures
You can capture frames for fast motion playback.
1
Use the four-way controller (2345) to select c (Time-
Lapse Movie) from the Capture Mode Palette.
2
Press the 4 button.
The camera returns to capture mode.
3
Press the shutter release button fully.
Recording starts. The maximum length of continuous recording time is 25
minutes.
4
Press the shutter release button fully again.
Recording stops.
If you set a start delay, a start time corresponding to the current time and
the start delay you set is displayed in real time.
The total time you can set differs according to the shooting interval you set,
as indicated in the table below.
The Date Imprint function (p.106) is available for Interval Movie mode.
Using the Time-Lapse Movie Function
Interval
Total time that can be set
30 fps
1 min
10 minutes to 5 hours and 59 minutes
(in increments of 1 minute)
5 min
30 minutes to 29 hours and 55 minutes
(in increments of 5 minutes)
10 min
1 hour to 59 hours and 50 minutes
(in increments of 10 minutes)
30 min
3 hours to 179 hours and 30 minutes
(in increments of 30 minutes)
1 hr
6 hours to 359 hours
(in increments of 1 hour)
07:34
07:34
07:34